ESU 58741 LokSound 5 Micro Direct Blank DCC Sound Decoder Kato USA, N Scale

ESU 58741 LokSound 5 Micro Direct Blank DCC Sound Decoder Kato USA, N Scale. ESU Part #58741 LokSound 5 BLANK Sound Decoder Micro DCC Direct Kato USA, for N Scale. Finally, these models can also be easily retrofitted with a LokSound decoder. A ESU Lokprogrammer part #53452 is required to load sound files to this decoder. The LokSound 5 micro DCC Direct Kato USA with its dimensions of 60.0mm x 10.1mm is a pure DCC decoder and comes without a loudspeaker. The LokSound 5 micro DCC Direct Kato USA is a "pure-bred" DCC decoder. 14 to 128 driving steps are as self-evident as 2- and 4-digit addresses. Up to 32 functions can be triggered. Auxiliary registers exist for control panels that can only program the CVs from 1-255.

The LokSound 5 micro DCC Direct Kato USA Decoder detects the Märklin® brake distances as well as ZIMO® HLU / ZACK commands or the Lenz® ABC system. Braking with DCC brake blocks or dc voltage is also possible. In addition, it also stops with a Selectrix® brake diode. An AUTOMATIC ABC commuter train allows automatic commuting between two stations.

The LokSound 5 micro DCC Direct Kato USA can be used on analog DC webs. The decoder switches "on-the-fly" fully automatically between operating modes. Most of the time, nothing needs to be adjusted. The LokSound 5 micro DCC Direct Kato USA Decoder can play up to 12 channels simultaneously. Each channel can be resolved with up to 16 bits / 31250 kHz and offers hi-fi quality on its system. There is virtually no difference to the original audible anymore. A Class-D audio output with up to 3W output power controls the speakers, which can have between 4 ohms and 32 ohms impedance. A 128 Mbit sound memory provides enough capacity. All individual noises can be adjusted individually in the volume.

The super-flexible sound engine without a rigid schedule allows the exemplary simulation of all conceivable rail tracks. Despite its compact dimensions, the LokSound 5 micro DCC Direct Kato USA is equipped with an enormen number of function outputs.

Two directly soldered SMD LEDs are designed for front and rear front and rear head lighting. For older models, two wired LEDs can alternatively be soldered and switched separately. Three further reinforced function outputs are also available. All important lighting functions are available.

The brightness of each output can be set separately. The motor control of the LokSound 5 micro DCC Direct Kato USA has a variable PWM clock frequency from 10kHz to 50kHz, which ensures super-quiet operation, especially for bell anchor motors - the typical "hum" is a thing of the past. The load control can be adapted to difficult cases with up to 10 CVs.

The unique "Autotune" function allows the decoder to be automatically measured against the motor. The LokSound 5 micro DCC Direct Kato USA decoder delivers up to 0.9A motor power. A PowerPack can be connected to the LokSound 5 micro DCC Direct Kato USA on request to bridge dirty rail sections. Of course, the outputs are protected against overload.

We want you to enjoy your decoder for as long as possible. Digitrax DS52 Stationary Decoder for Snap Switches or Slow Motion Machines NIB. Digitrax SDXH167D Series 7 Sound Decoder HO Scale. Digitrax Z/N/HO DZ126PS DCC Decoder 8-Pin Medium Plug 1 Harness. ESU 59120 LokPilot 5 FX Micro Function Only DCC Decoder NEM652 8 pin Harness NIB.

ESU 59610 LokPilot 5 DCC/MM/SX/M4 Mobile Decoder with 8 Pin Harness HO Scale. ESU 59612 LokPilot 5 DCC/MM/SX/M4 Decoder PLUX22 NEM658, HO Scale. ESU 59620 LokPilot 5 Mobile DCC Decoder 8 Pin Harness NEM652 for HO Scale NIB.

ESU 59629 LokPilot 5 21Pin Mobile DCC Decoder NEM660 No Wires HO Scale. ESU 59810 LokPilot 5 Micro DCC Decoder 8-pin Harness NEM652, N/Z Gauge. ESU 59820 LokPilot 5 BLANK Sound Decoder, Micro DCC, 8-pin NEM652, N Scale. ESU 58823 LokSound V5 micro DCC BLANK Sound Decoder W/ Open Wires HO Scale NIB.

ESU 58821 LokSound V5 DCC Direct Blank Sound Decoder, for HO Scale NIB.